BAPI WIRELESS TEMPERATURE
and HUMIDITY SENSORS
 
• 8 Year Battery Life
• Built In Error Detection
• 100 ft Range, Extendable to 1,000 Feet with Repeater
• Voltage, Current or Resistive Output 

 

 

   The BAPI Wireless Temperature or Temp./Humidity Combination system incorporates a 418 MHz transmitter along with a Receiver and one or more Analog Output Modules to send zone temperature and humidity to the DDC controller.
   The wireless transmitter has a minimum in-building range of 100 feet, extendable to the 1,000 feet with a Repeater. The transmitter has an estimated battery life of 8 years with a transmit rate of approximately once every 10 seconds.

   

 
   
Room Transmitter
Measures the room temperature or temp./humidity and transmits the data through 418MHz RF to a Receiver.

Now with Setpoint & Override!
 
 
 Duct Transmitter
Measures the Duct temperature or temperature/humidity combination and transmits the data through 418MHz RF to a Receiver.

 
Immersion Transmitter
Measures the temperature and transmits the data through 418MHz RF to a Receiver.
 
 Remote Probe Transmitter
Measures the temperature and transmits the data through 418MHz RF to a Receiver.
Outside Air Transmitter
Measures the Outside Air temperature or temperature/humidity combination and transmits the data through 418MHz RF to a Receiver.
 
 Wireless Receivers
Receives the RF signal from one or more transmitters or repeaters, and outputs the data to an Analog Output Module.
Analog Output Modules
Converts the data from the Receiver into a resistance, voltage or current for the DDC controller. Receives data through a four-wire bus.
 
 Wireless Repeater
Receives the 418 MHz RF signal from one or more transmitters which have a range of 100 feet. The Repeater re-transmits the signal at 900 MHz to a distance of 1,000 feet to a 900 MHz Receiver.
Field Verifiers and Field Verifier Kits
The Field Verifiers measure how far the BAPI Wireless Transmitter or Repeater signals will travel in a specific installation. They are available for purchase or as 30-day loaners.
 
   Wireless Thermobuffer
 The BAPI Wireless Thermobuffer wirelessly transmits the temperature of walk-in freezers or coolers to a receiver within 100 feet. The Thermobuffer slows the temperature reaction of a freezer door opening to prevent false alarms or short cycling the compressor.

 

Download complete catalog

 

We Carry:

(Click Name for more info)

 

 

 

 

 

 

 

 

 

 

 

Most Items available for immediate shipment!

-Copyright 2010 M&M Controls, All Rights Reserved

ALL REGISTERED TRADEMARKS ARE FULLY ACKNOWLEDGED BY:
M&M Control Service, Inc.
(ALL NAMES UNINTENTIONALLY EXCLUDED FROM THIS LIST WILL BE INCLUDED IN THE NEXT REVISION UPON OUR NOTIFICATION)
*This list may vary, as names not appearing on this list are entitled to the acknowledgment of their Trademarks by M&M Control Service, Inc.

(Powers™, also known as, POWERS REGULATOR, MCC POWERS, POWERS-FIAT, POWERS PROCESS CONTROLS, CRANE POWERS and POWERS, a Watts Industries Company.  The POWERS trademark is owned by Powers, A Division of Watts Water Technologies, Inc.  M&M Control Service, Inc. Is a Stocking Distributor for Powers™)

M&M CONTROL SERVICE, INC. DOES NOT REPRESENT OR CLAIM ANY AFFILIATION WITH ANY MANUFACTURER. WE FULLY ACKNOWLEDGE ALL TRADEMARKS AND/OR NAMES WHICH ARE PICTURED AND/OR LISTED THROUGHOUT THE M&M CONTROL SERVICE, INC. WEBSITE.